ウェビナー

  • {3}

    {1}

    {2}

    {4}

    登録する

  • Application Webinar
    Improving Safety by Measuring CO in Fuel Handling Systems

    1 Hr

    For AMETEK Land Sales Partners and Internal Sales
    Presented by Derek Stuart, Global Product Manager – Power, Combustion and Environmental
    All fuels oxidise during storage and transportation, but some are especially problematic and pose a high risk to plant and personnel. Sub-bituminous coals such as those from Powder River Basin are notoriously prone to spontaneous combustion. Biomass pellets are also susceptible to spontaneous heating, and pose similar risks. Avoiding spontaneous combustion is essential for personnel safety and asset protection. Carbon monoxide (CO) gas detection offers a fast, sensitive means to detect the presence of oxidising fuel, as the oxidation process inevitably produces large amounts of CO and is a precursor to an actual fire. In this webinar, we outline the risks and describe the detection options offered by AMETEK Land.

    登録する

  • Product Webinar
    Introduction of Landmark Graphic MkII Processor Replacement for Landmark Graphic HotSpotIR

    1 Hr

    For AMETEK Land Sales Partners and Internal Sales
    Presented by Manfred Hayk, Global IR Product Manager - AMETEK Land
    In this webinar, we introduce the LMG MkII replacement for the LMG/HotSpotIR and consider the main differences, connections, models available, recommended system configurations, pricing and marketing tools/datasheets.

    登録する

  • Application Webinar
    Measuring Opacity with 4500 MkIII

    1 Hr

    For AMETEK Land Sales Partners and Internal Sales
    Presented by Derek Stuart, Global Product Manager – Power, Combustion and Environmental – AMETEK Land
    In this webinar, we introduce the most versatile and accurate opacity monitor for measuring emissions from combustion sources - the 4500 MkIII. It is ideally suited to applications where the site operator has to demonstrate compliance with US EPA and equivalent standards. You will learn about the EPA rules for emissions measurement, how to specify the 4500 MkIII to suit the requirements of the application and how the AMETEK Land system lines up against its main competitors.

    登録する

  • Application Webinar
    Lancom 4 Applications in Natural Gas

    1 Hr

    For AMETEK Land Sales Partners and Internal Sales
    Presented by Derek Stuart, Global Product Manager – Power , Combustion and Environmental – AMETEK Land
    The Lancom 4 is a powerful and rugged portable multi-gas analyzer for combustion applications which finds applications in a wide range of combustion applications. This webinar will focus on applications in the natural gas industry where it can be used to monitor emissions and optimize combustion conditions.

    登録する

  • Application Webinar
    Advances in non-contact temperature measurement in metal reheat furnaces

    1 Hr

    Presented by Manfred Hayk, Global IR Product Manager - AMETEK Land
    In this webinar, we introduce how advances in accurate non-contact temperature measurements in metal reheat furnaces ensure optimum product quality, reduced wastage, energy savings, consistent metallurgical properties and minimal surface scaling. It considers the requirements and challenges for infrared temperature measurement in reheat furnaces for bringing cold metal to the correct temperature for rolling, extruding or forging.

    登録する

  • Product Webinar
    SPOTPro Software Launch

    1 Hr

    For AMETEK Land Sales Partners and Internal Sales
    Presented by Manfred Hayk, Global IR Product Manager - AMETEK Land
    In this webinar, we introduce our enhanced SPOT infrared pyrometer software packages, specifically the new SPOTPro advanced software facility which provides a single control point to configure, store and view data from up to 40 SPOT infrared pyrometers and is designed to give users an even better understanding of the performance of their processes and help realise industry 4.0 connectivity.

    登録する

  • Product Webinar
    SPOTPro Software Launch

    1 Hr

    For AMETEK Land Internal Sales
    Presented by Manfred Hayk, Global IR Product Manager - AMETEK Land

    In this webinar, we introduce our enhanced SPOT infrared pyrometer software packages, specifically the new SPOTPro advanced software facility which provides a single control point to configure, store and view data from up to 40 SPOT infrared pyrometers and is designed to give users an even better understanding of the performance of their processes and help realise industry 4.0 connectivity.

    登録する

  • Application Webinar
    Non-contact temperature measurement advances in cement manufacturing

    1 Hr

    Presented by Derek Stuart, Global Product Manager – Power, Combustion and Environmental - AMETEK Land
    In this webinar, AMETEK Land introduces how advances in accurate non-contact temperature measurements in cement manufacturing ensure consistent quality, oversee the condition and efficiency of the kiln and detect emerging hot spots in materials.

    登録する

  • Application Webinar
    Advances in Non-Contact Temperature Measurement for Continuous Annealing and Galvanizing Lines

    1 Hr

    For AMETEK Land Sales Partners.
    Presented by Manfred Hayk, Global Infrared (IR) Product Manager.
    This webinar will introduce how advances in accurate non-contact temperature measurements for continuous annealing (CAL) and galvanizing (CGL) lines ensure required metal characteristics and surface conditions are achieved in steel production.

    登録する

  • Product Webinar
    New Product Launch: SPOT GS - Steel Application Pyrometer for Galvannealed and Galvanized Strip

    1 hr

    For AMETEK Land Sales Partners.
    Presented by Fiona Turner, Physics Section Manager
    This webinar will introduce the new AMETEK Land SPOT GS, Steel Application Pyrometer for temperature measurement of Galvannealed and Galvanized Strip, which enables automated furnace management to provide close control of the reaction and position of the reaction zone, delivering tighter control of product quality.

    登録する

トピックスおよび日付は約2週間前に確認されますので、このページで定期的に最新の情報を確認してください。現在リストされているウェブセミナーはありません。すぐにもう一度ご確認ください。