アーカイブ

Global Industry Manager

Philippe, previously Regional Sales Manager EMEA – Glass for LAND, has over 20 years’ experience in high value, complex technical solution sales with specialities in glass, renewable energies, automotive, water filtration, energy production, gas turbines, automation, building automation and oil and gas. He holds a degree in mechanical engineering (Diploma of Higher education) associated to ESTACA degree (Aeronautics and Automotive Engineering school).

{2}

{1} {4}

{6}

{3}
引き続きお読みください

{0}
How to Enhance Combustion with NIR-Bs to Reduce Emissions and Boost Energy Efficiency

月曜日, 11月 20, 2023 | Philippe Kerbois

製品

In the realm of furnace thermal imaging, utilising NIR-B-2K and IMAGEPro Glass serves as an excellent starting point to minimise energy consumption, reduce emissions, and optimise combustion in fired glass furnaces.
引き続きお読みください
Why Should I Use Two NIR-Bs on Container Glass Furnaces?

水曜日, 7月 26, 2023 | Philippe Kerbois

製品アプリケーション

The challenge is real when it comes to using two thermal imaging NIR-B-2K cameras on a container glass furnace. One camera cannot see everything! Ideally, having two thermal NIR borescopes, one at each end, would be perfect, but resources are limited.
引き続きお読みください
How to Use the New LWIR-640 and its IMAGEPro Software to Monitor the Exterior of a Glass Furnace and Avoid Glass Leaks

木曜日, 4月 20, 2023 | Philippe Kerbois

アプリケーション製品

There are several benefits of using an LWIR-640 for monitoring the outside temperature of glass furnaces and preventing any potential glass leaks. There are two main ways to use the instrument and its software, and we will highlight them in this blog.
引き続きお読みください
Combining a Transportable NIR-B-2K & Lancom 4 for Thermal Surveys & Combustion Optimisation

火曜日, 3月 28, 2023 | Philippe Kerbois

アプリケーション

In this blog, we are going to explain what the benefits are of combining thermal surveys with the transportable NIR-B-2K (Near-Infrared Borescope) and Lancom 4 gas analyser.
引き続きお読みください
Using Fiber-Optic Instruments (FGs) for Live Temperature Monitoring in Container Glass Furnaces

水曜日, 2月 22, 2023 | Philippe Kerbois

アプリケーション製品

The AMETEK Land FG series is commonly used in industrial applications such as steel production, glass manufacturing, power generation, and chemical processing, where accurate and reliable temperature measurement is critical for safe and efficient operation.
引き続きお読みください
How to Improve Temperature Gradient and Quality of Glass Ribbons Using The LSP-HD Linescanner

木曜日, 1月 19, 2023 | Philippe Kerbois

製品

In this blog, we will explain how our line scanning LSP-HD system could reinforce the quality of glass ribbon products during the annealing process into the lehr.
引き続きお読みください
Combining a NIR-B-2K-Glass, a Cyclops L and a Lancom 4 to Improve Your Carbon Footprint and Reduce NOx Emissions in Glass Furnace Applications

水曜日, 11月 30, 2022 | Philippe Kerbois

In this blog, I will discuss combining three of our products; the handheld Cyclops L Pyrometer, the NIR-B-2K-Glass Thermal Imager and the Lancom 4 Gas Analyser.
引き続きお読みください
Using Transportable NIR-B-2K Imager for Thermal Surveys and Combustion Optimisation to Reduce Energy

水曜日, 10月 19, 2022 | Philippe Kerbois

製品

In this blog, I will explain how the NIR-B-2K thermal imager could be used as a transportable device to reinforce thermal optimisation of furnaces and in-furnace thermal glass surveys that provide essential insights into thermal processes to reduce energy and emissions.
引き続きお読みください
Reinforcing Cyclops Handheld Pyrometer Uses with NIR-B-2K Thermocouple Verification and Hot Spot Monitoring

水曜日, 9月 28, 2022 | Philippe Kerbois

製品

In this blog, I will explain how the NIR-B-2K thermal imager could reinforce the Cyclops C100L handheld, portable pyrometer temperature measurements in glass furnace operations.
引き続きお読みください
Complete Open Gateways with the NIR-B-2K-Glass Thermal Imager to Have Digital 4.0 Data Exchange and SCADA

木曜日, 7月 28, 2022 | Philippe Kerbois

製品

For batch monitoring and furnace control of a glass furnace to be most effective, the NIR-B-2K-Glass camera should be integrated into the DCS control of the furnace and be connected to the existing PLC.
引き続きお読みください

このページをシェアする

Tweets by @Landinst